–\u2764\u2764–Rootstock and scion it is easy to match the U-cut-cut or \u03a9-cut, rapid healing.
–\u2764\u2764–Using easily and fast. Grafting method than the traditional savings.
–\u2764\u2764–The time and effort Blades can be replaced.
–\u2764\u2764–Use the pruner to cut useless branches from the plant.
–\u2764\u2764–Specifications:
–\u2764\u2764–Materials: carbon steel, ABS and Aluminum
–\u2764\u2764–Cut grafting stocks\u00a0 diameter from 5mm-12mm
–\u2764\u2764–Trimming blades thickness:\u00a0 3mm\/0.12inch
–\u2764\u2764–Phillips screwdriver with red handle
–\u2764\u2764–Size: As the picture show
–\u2764\u2764–Grafting Tape Width: 2cm\/0.79Inch
–\u2764\u2764–How to use:
–\u2764\u2764–Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant. \u00a0
–\u2764\u2764–Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only. \u00a0
–\u2764\u2764–Step 3: Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions. \u00a0
–\u2764\u2764–Step 4: Use the pruner to cut useless branches from the plant. \u00a0
–\u2764\u2764–Step 5: The grafting tool with “V & U & \u03a9” blades and the end of blades both can cut, one piece blades can be used as two pieces blades, so you would have total six pieces blades.
–\u2764\u2764–Included:
–\u2764\u2764–Choice 1: 1 set x Farming Pruning Shears Scissor Kit
–\u2764\u2764–Choice 2: 1 set x Farming Pruning Shears Scissor Kit, 1 x Storage Box
–\u2764\u2764–Choice 3: 1 set x Farming Pruning Shears Scissor kit, 1 x Tape Film<\/p>\n